|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
www.fairchildsemi.com KA5Q0565RT Features * * * * * * * * * Fairchild Power Switch(FPS) Description The Fairchild Power Switch(FPS) product family is specially designed for an off-line SMPS with minimal external components. The Fairchild Power Switch(FPS) consists of a high voltage power SenseFET and a current mode PWM IC. The integrated PWM controller includes the fixed oscillator, the under voltage lock out, the leading edge blanking, the optimized gate turn-on/turn-off driver, the thermal shut down protection, the over voltage protection, and the temperature compensated precision current sources for loop compensation and fault protection circuitry. Compared to a discrete MOSFET and a controller or a RCC switching converter solutions, a Fairchild Power Switch(FPS) can reduce the total number of components, design size, and weight, so it will improve efficiency, productivity, and system reliability. It has a basic platform well suited for cost-effective design in a quasi-resonant converter as a C-TV power supply. TO-220F-5L Quasi Resonant Converter Controller Internal Burst Mode Controller for Stand-by Mode Pulse by Pulse Current Limiting Over Current Latch Protection Over Voltage Protection (Vcc: Min. 27V) Internal Thermal Shutdown Function Under Voltage Lockout Internal High Voltage Sense FET Auto-Restart Mode 1. Drain 2. GND 3. VCC 4. Feedback 5. Sync Internal Block Diagram VCC DRAIN 3 Internal BIAS 1 11V on 12V off Burst Mode 3.5V/1.25V VREF + UVLO 15V/9V + + S Ro Ron n QB Rof Roff f SYNC 5 Normal Mode 4.6V/2.6V VREF + - OSC R Ifb LEB 450ns FEEDBACK 4 2.5R R + Idelay 1V + S Q Offset + 7.5V Delay 80ns + - OLP Power on Reset OCL Thermal Shut Down Power Reset + - Rsense 1V R Q S R VCC 30V 2 SOURCE OVP Rev.1.0.4 (c)2004 Fairchild Semiconductor Corporation KA5Q0565RT Absolute Maximum Ratings (Ta=25C, unless otherwise specified) Parameter Drain-source Voltage Drain-Gate Voltage (RGS=1M) Gate-Source (GND) Voltage Drain Current Pulsed (2) Symbol VDSS VDGR VGS IDM IAS(EAS) ID ID VCC VFB PD Derating TJ TA TSTG Rthjc - Value 650 650 30 11 13(400) 2.8 1.7 30 -0.3 to Vcc 38 0.3 +160 -25 to +85 -55 to +150 3.29 2.0 300 Unit V V V ADC A(mJ) ADC ADC V V W W/C C C C C/W kV V Single Pulsed Avalanch Current(3)(Energy (2)) Continuous Drain Current (Tc = 25C) Continuous Drain Current (TC=100C) Supply Voltage Input Voltage Range Total Power Dissipation Operating Junction Temperature Operating Ambient Temperature Storage Temperature Range Thermal Resistance ESD Capability, HBM Model (All pins) ESD Capability, Machine Model (All pins) Notes: 1. Tj = 25C to 150C 2. Repetitive rating: Pulse width limited by maximum junction temperature 3. L = 30mH, VDD = 50V, RG = 25, starting Tj = 25C 4. L = 13uH, starting Tj = 25C 2 KA5Q0565RT Electrical Characteristics (SFET Part) (Ta=25C unless otherwise specified) Parameter Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Static Drain-source on Resistance (Note) Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn on Delay Time Rise Time Turn Off Delay Time Fall Time Total Gate Charge (Gate-Source+Gate-Drain) Gate-Source Charge Gate-Drain (Miller) Charge Note: 1. Pulse test : Pulse width 300S, duty 2% Symbol BVDSS IDSS RDS(ON) Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd Condition VGS = 0V, ID = 50A VDS = Max, Rating, VGS = 0V VDS= 0.8*Max., Rating VGS = 0V, TC = 85C VGS = 10V, ID = 2.3A VGS = 0V, VDS = 25V, f = 1MHz VDD= 0.5BVDSS, ID= 7.0A (MOSFET switching time are essentially independent of operating temperature) VGS = 10V, ID = 7.0A, VDS = 0.5B VDSS (MOSFET Switching time are Essentially independent of operating temperature) Min. 650 - Typ. Max. 1.8 780 90 40 15 45 60 40 43 4.0 7.3 200 300 2.2 40 100 130 90 55 - Unit V A A pF nS nC 3 KA5Q0565RT Electrical Characteristics (Continued) (Ta=25C unless otherwise specified) Parameter UVLO SECTION Start Threshold Voltage Stop Threshold Voltage OSCILLATOR SECTION Initial Frequency Voltage Stability Temperature Stability (Note2) Maximum Duty Cycle Minimum Duty Cycle FEEDBACK SECTION Feedback Source Current Shutdown Feedback Voltage Shutdown Delay Current PROTECTION SECTION Over Voltage Protection Over Current Latch Voltage (Note2) Thermal Shutdown Temp. SYNC SECTION Normal Sync High Threshold Voltage Normal Sync Low Threshold Voltage Burst Sync High Threshold Voltage Burst Sync Low Threshold Voltage VNSH VNSL VBSH VBSL VCC = 16V, Vfb = 5V VCC = 16V, Vfb = 5V VCC = 10.5V, Vfb = 0V VCC = 10.5V, Vfb = 0V 4.0 2.3 3.2 1.1 4.6 2.6 3.6 1.3 5.2 2.9 4.0 1.5 V V V V VCCOVP VOCL TSD VCC 26V 27 0.9 140 30 1.0 160 33 1.1 V V C IFB VSD IDELAY VFB = GND Vfb 6.9V VFB = 5V 0.7 6.9 4 0.9 7.5 5 1.1 8.1 6 mA V A FOSC FSTABLE FOSC DMAX DMIN 12V Vcc 23V -25C Ta 85C 18 0 0 92 20 1 5 95 22 3 10 98 0 kHz % % % % VSTART VSTOP VFB = GND VFB = GND 14 8 15 9 16 10 V V Symbol Condition Min. Typ. Max. Unit Note: 1. These parameters is the current flowing in the Control IC. 2. These parameters, although guaranteed, are tested in EDS(wafer test) process. 3. These parameters indicate Inductor Current. 4 KA5Q0565RT Electrical Characteristics (Continued) (Ta=25C unless otherwise specified) Parameter BURST MODE SECTION Burst Mode Low Threshold Voltage Burst Mode High Threshold Voltage Burst Mode Enable Feedback Voltage Burst Mode Peak Current Limit Peak Current Limit(Note3) TOTAL DEVICE SECTION Start Up Current Operating Supply Current (Note1) ISTART IOP IOP(MIN) IOP(MAX) Vfb = GND, VCC = 14V Vfb = GND, VCC = 16V Vfb = GND, VCC = 10V Vfb = GND, VCC = 28V 10 18 mA 0.1 0.2 mA VBURL VBURH VBEN IBU_PK IPK Vfb = 0V Vfb = 0V Vcc = 10.5V Vcc = 10.5V 10.4 11.4 0.7 0.65 3.08 11.0 12.0 1.0 0.85 3.5 11.6 12.6 1.3 1.1 3.92 V V V A A Symbol Condition Min. Typ. Max. Unit CURRENT LIMIT(SELF-PROTECTION)SECTION Note: 1. These parameters is the current flowing in the Control IC. 2. These parameters, although guaranteed, are tested in EDS(wafer test) process. 3. These parameters indicate Inductor Current. 5 KA5Q0565RT Typical Performance Characteristics 1.10 1.05 1.00 0.95 0.90 0.85 -25 0 25 50 75 Temp.(C) 100 125 150 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 1. Start Voltage 1.10 1.08 Figure 2. Stop Voltage 1.05 1.01 1.00 0.94 0.95 0.90 0.85 0 25 50 75 Temp.(C) 100 125 150 0.87 0.80 -25 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 3. Stand by Current 1.10 1.05 1.00 0.95 0.90 0.85 -25 0 25 50 75 Temp.(C) 100 125 150 1.10 1.06 1.02 0.98 0.94 0.90 -25 Figure 4. Operating Current 0 25 50 75 Temp.(C) 100 125 150 Figure 5. Initial Frequency Figure 6. Maximum Duty 6 KA5Q0565RT Typical Performance Characteristics (Continued) 1.50 1.20 0.90 0.60 0.30 0.00 -25 0 25 50 75 Temp.(C) 100 125 150 1.20 1.12 1.04 0.96 0.88 0.80 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 7. Feedback Offset Voltage 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 1.10 1.06 1.02 0.98 0.94 0.90 -25 Figure 8. Feedback Source Current 0 25 50 75 Temp.(C) 100 125 150 Figure 9. Over Voltage Protection Figure 10. Shutdown Feedback Voltage 1.10 1.40 1.05 1.20 1.00 0.95 0.90 0.85 -25 0 25 50 75 Temp.(C) 100 125 150 1.00 0.80 0.60 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 11. ShutDown Delay Current Figure 12. Burst Mode Enable Feedback Voltage 7 KA5Q0565RT Typical Performance Characteristics (Continued) 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 Temp.(C) 75 100 125 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 13. Burst Mode Low Threshold Voltage 1.10 1.06 1.02 0.98 0.94 0.90 Figure 14. Burst Mode High Threshold Voltage 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 15. Burst Mode Sync. High Threshold Voltage Figure 16. Burst Mode Sync. Low Threshold Voltage 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 1.20 1.12 1.04 0.96 0.88 0.80 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 17. Primary Voltage Figure 18. Primary Mode Gain 8 KA5Q0565RT Typical Performance Characteristics (Continued) 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 Figure 19. Peak Current Limit 1.10 1.06 1.02 0.98 0.94 0.90 -25 0 25 50 75 Temp.(C) 100 125 150 1.10 1.06 1.02 0.98 0.94 0.90 Figure 20. Burst Mode Peak Current Limit -25 0 25 50 75 Temp.(C) 100 125 150 Figure 21. Normal Mode Sync. High Threshold Voltage Figure 21. Normal Mode Sync. Low Threshold Voltage Typical Performance Characteristics (MOSFET Part) EAS-TCH 500 AVALANCHE ENERGY EAS [mJ] Z JC(t), Thermal Response 400 D=0.5 10 0 0.2 0.1 0.05 10 -1 300 Notes : 1. Z JC(t) = 3.29 /W Max. 2. Duty Factor, D=t1/t2 3. TJM - TC = PDM * Z JC(t) 200 0.02 0.01 single pulse 100 0 25 50 75 100 125 150 10 -2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 CHANNEL TEMPERATURE Tch [] t1, Square Wave Pulse Duration [sec] Figure 22. Temperature (TC) vs. Eas Curve Figure 23. Transient Thermal Response Curve 9 KA5Q0565RT Package Dimensions TO-220F-5L 10 KA5Q0565RT Package Dimensions (Continued) TO-220F-5L(Forming) 11 KA5Q0565RT Ordering Information Product Number KA5Q0565RTTU KA5Q0565RTYDTU TU : Non Forming Type YDTU : Forming Type Package TO-220F-5L TO-220F-5L(Forming) Operating Temp. -25C to +85C DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 12/6/04 0.0m 001 Stock#DSxxxxxxxx 2004 Fairchild Semiconductor Corporation |
Price & Availability of KA5Q0565RT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |